Filter
Top Products
(_) Using the Timer Menu
fl Timer
beyffght $_vlngs: On
C_rren t Time
Timer
..... ._AM
M_e _. 8elector End
After setting the clock you can use the timer
to turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 25.
To select the Timer _ menu:
Dispb_y _ HigNght (_) _ S_,,lect
Set daylight _v#lg time before settb N the clock. At_y
loss of power will cause these setlSngs to be erased.
Daylight Savings Spring: Select On to compensate for Daylight Saving Time,
/t__,_#_ The current time automatically moves ahead one hour.
_S_d_ _ _J,_ Fall: Select Off at the end of Daylight Saving Time,
The current time moves back one hour,
Current Time
Timer
1 Press @, then press ,1_or t_ until the currant day
(Sun-Sat) is displayed, and press (2/?.
2 Press .1_or .I, until the currant hour (1-12) and
AMtPM isdisplayed, and press @.
3 Press .1_or .I, until the currant minute (00-59) is
displayed, and press @.
The clock has now started. Press MENU to exit.
1 Press .1_or t_ until the desired day or range of days
(Every Sun-Sat, Every Mon-Fri, Sunday, Monday ....
Saturday, Every Sunday, _, Every Saturday) is _ ¢'_ _' _.....
displayed, and press @.
2 Press ,1_or ,I, until the time (hours and minutes) that so_ _,<_,_
you want the projection TV to remain on is displayed, _,.. _r_ _ _:_
and then press @.
3 Press ,1_or ,I,to set the time duration (maximum of 6 hours) and press Q-),
4 Press ,1_or ,I,to select the desired channel and press @.
The timer is now set, The TIMERISTAND BY indicator on your projection TV
will be lit.
Press MENU to exit, To cancel your timer setting, press RESET while in the
Timer window. Performing Auto Program will erase all Timer settings.
2_