Sony KP- 57WV700 Projection Television User Manual


 
m
_ VIDiO tN
i
$ VIDEO
v,oEo
A/V cable
Notes on Using This Connection
AUX
TO
VHF_HF
( Splitter
not supplied) 1
Coaxial _NW:_ _ _
Coaxial_
cable _ 4
Cablesare often
color-codedto connectors.
Connect_ tored,
white to white,et_
Watch cable (unscrambled)
channels
Watch
cable box (scrambled)
channels
Press TV/VIDE0 repeatedly to select the cable input (UHF/VHF in the
Watch the VCR
Set up the TV remote control
to operate the cable box or
VCR
Activate the remote control to
operate the cable box or VCR
illustration).
Turn on the vcR and tune it to the channel the cabiet;ox is set to(usually
channel 3 or 4). Press W/VIDE0 repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Press TV/VIDE0 repeatedly to select the VCR input (VIDEO 1 in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 51-52.
Control specific cable box and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
For the cable box, press SAT/CABLEFUNCTION.For the VCR, open the outside
cover, as shown on page 50. Then set the A/V slide switch to the position
you programmed for the VCR.
See "Operating a Cable Box" on page 54 and ,,operating a VCR" on page 53.
See the instructions for setting up Video Labels on pages 83-84.
29