Sony KP- 57WV700 Projection Television User Manual


 
Notes on Using This Connection
Watch the satellite receiver
Press W/VIDE0 repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch the VCR
Set up the TV remote control
to operate the satellite
receiver or VCR
Activate the TV remote
control to operate the satellite
receiver or VCR
The VCR may need to be turned on and set to the satellite receiver input.
Press W!VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
If you have a non'Sony VCR or satellite receiver, you must program the
remote control. See "Programming the Remote Control" on pages 51-52.
For the satellite receiver, press SAT/CABLEFUNCTION.For the VCR, open the
outside cover, as shown on page 50. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and on
See "Operating a Satellite Receiver" on page 53 and "Operating a VCR"
VCR functions with the TV page 53.
remote control
Label VideO inputs io easiiy .... _e tide ir_structions for se_ng up Vide0 Labels onpages 83284. ......................
identify equipment connected
to the TV
35