Filter
Top Products
Remote Control
Remote control
The batteries could be weak. Replace the batteries.
does not operate ..] Check the orientation of the batteries.
J Press the TVFUNCTIONbutton. You may have inadvertently pressed the
SAT/CABLEFUNCTIONbutton, which changes the remote control to SAT or
CABLE mode.
J Make sure the TV's power cord is connected securely to the wall outlet.
J Locate the TV at least 3-4 feet away from fluorescent lights.
Cannot change channels J If you are using the TV to Ch_ge ch_eis, first press the TVFUNCTION
with the remote control button.
!1 If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Channel Fix option to "fix" the channel based on the hookup you used (see
page 78).
Zi If you are using another device to change channels, be sure to press the
FUNCTIONbutton for that device. For example, if you are using your cable box
to change channels, be sure to press the SAT/CABLEFUNCTIONbutton.
Remote control ZI If you replaced the batteries to the remote recently, the code numbers for
does not operate non-Sony the video equipment may need to be reset.
video equipment 3 There may be more than one code for the equipment that you are
attempting to operate.
J There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote.You may need to use the equipment's original
remote control.
Memory Stick
Image does not display
Blank square appears _3
instead of a thumbnail image
Cannot rotate image, no
thumbnail appears
Cannot hear audio while
using Memory Stick
Image file name does not
appear; instead, dashes (---)
appear
Q Make sure the image is supported by the TV (see pages 64-65).
J Make sure the Memory Stick is inserted properly (see page 66).
J Memory Stick functions are not available while using Twin View, Freeze or
Favorite Channel functions.
This indicates that the image does not support a thumbnail Viewl Selecting
the icon, however, displays the full-size image on the screen. It could also
indicate that both the thumbnail and full-size images are corrupted or not
supported.
Be sure the LOCK switch on the Memory Stick is set to off.
J If a blank square appears instead of the thumbnail image, this indicates
that the image does not support a thumbnail view and cannot be rotated.
,3 There is no audio available While using Memory Stick.
Dashes appear instead of the file name if the image was recorded using
equipment that is not DCF-compliant. Dashes also appear if a DCF-
compliant file was renamed.
91