Filter
Top Products
Digital TV Set-Top
Box with
Component
Video Connectors
To connect a digital TV set-top box with component video connectors
1 Use three separate component video cables to connect the DVD
player's Y, PB and PR jacks to the Y, PB and PR jacks (VIDEO 5) on
the TV.
The Y, PBand PRjacks on your DVD player are sometimes labeled Y,
CBand CR,or Y, B-Y and R-Y. If so, connect the cables to like colors.
2 Use an audio cable to connect the set-top box's audio output jacks
to the TV's VIDEO 5 audio input jacks.
1
ml co,or ° de;:p edooo
2 Connectredto red,
white to white,etc.
Audiocable
Componentvideocables
i
-
._ VIDEO
__VIDEO
@
B
AbrX
@
TO
CONVERTER
©
VHF/UHF
@
Notes on Using This Connection
Watch the digital TV set-top
box
Label video inputs to easily
identify equipment connected
to the TV
Press W/VIDE0 repeatedly to select the digital TV set-top box input (VIDEO 5
in the illustration).
See the instructions for setting up Video Labels On pages 83-84.
You cannot record the signal from any equipment connected into the Y, Pe,
PRjacks.
39