Filter
Top Products
R If 4:3 Default is setto
anything but Off,the Wide Mode
setting changesonly for the
current channel. When you
change channels(or inputs),
Wide Mode is automatically
replacedwith the 4:3 Default
setting. Toretain the current
Wide Modesetting aschannels
and inputs are changed, set4:3
Defaultto Off.
4:3 Default Wide Zoom
Select the default
Screen Mode to
use for 4:3 sources Normal
Select to enlarge the 4:3 size picture, while
the upper and lower parts of the picture are
condensed to fit the wide screen.
Select to return the 4:3 picture to normal
mode.
Vertical Center
Full Select to enlarge the 4:3 picture
horizontally only, to fill the wide screen.
Zoom Select to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Off Select to continue using the current Wide
Mode setting when the channel or input is
changed.
Allows you to move the position 0f_e pic_re up and ....
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Move the joystick t or _ and press C) to choose a
correction between +15 and -15 (Zoom mode), and +10
and -10 (Wide Zoom mode).
77