Filter
Top Products
14 (US)
Installing and Connecting the TV
Connecting a Digital TV Receiver
Notes
• You cannot record the signal from any equipment connected into the Y, PB and PR
connectors.
• This TV is not compatible with digital TV receivers configured with RGB or VGA output
connectors.
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B and PR jacks to the TV.
Notes
• The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide
sound.
• Component video (Y, PB, PR) connection is necessary to view 480i, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of 852 dots ×
1024 lines (KZ-32TS1), or 1024 × 1024 (KZ-42TS1).
2 Using an AUDIO cable, connect the Digital TV Set-top box’s Audio
OUT jacks to the TV’s AUDIO IN jacks.
HD VD
IN
OUT
PB/BY/G PR/R
LR
AUDIO
LR
VHF/UHF
AC IN
AUDIO OUT
COMPONENT VIDEO IN 2
/
RGB IN
SUB
WOOFER
CONTROL
S
VIDEO
LR
AUDIO
PBYPR
LR
AUDIO
S VIDEO
VIDEO IN 1 COMPONENT VIDEO IN 1
VIDEO IN 2
VMC-10HG (not supplied)
AUDIO-L (white)
AUDIO-R (red)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
P
R
PB
Y