Filter
Top Products
Introducing the Sony LCD Projection TV
14
1 Turn off the power switch on the LCD projection TV and after several
minutes, unplug the power cord.
(The cooling fan will continue to blow for about two minutes after
turning the power off.)
2 Unplug the power cord after turning off the main power. Wait at least 30
minutes to allow the lamp to cool down before replacing it.
Take the new lamp out of the box.
3 Remove the front panel.
4 Loosen the screw with a coin or similar object to remove the lamp cover.
✍ Do not touch the front glass of a new lamp or the glass of the lamp
receptacle. This may reduce picture quality or lamp life.
Hold the LCD
projection TV firmly so
that it does not move.
Grasping the right end of the front panel with
your fingers, pull the panel towards you.