Filter
Top Products
Installing and Connecting the LCD Projection TV
34
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Connect the CATV cable to the VCR’s VHF/UHF IN jack.
3 Using a coaxial cable, connect the VCR’s OUT jack to the LCD
projection TV’s VHF/UHF jack.
4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
Coaxial cable
Rear of LCD projection TV
S VIDEO
AUDIO-R
(red)
AUDIO-L
(white)
Satellite receiver
VCR
YC-15V/
30V (not
supplied)
VMC-810S/
820S (not
supplied)
VMC-810S/820S
(not supplied)
Satellite
antenna
cable
Cable
YC-15V/30V (not supplied)
VIDEO
(yellow)