Filter
Top Products
3-6 (E) Chapter 3 Operations for Linear/Nonlinear Editing
3-1 Operations for Linear Editing (Operations in File Units)
3-1-2 Creating a New File
Creating a new file
R
STORE
+
-
P1 P2 BG
PORT/FILE ASSIGN
DEL
FILE
NEW
FILE
FILE
You can create or load a new file to start editing using the following
procedure.
1 Press the MAVE-F555 R key, and select an MAV-555 port.
2 Press the NEW FILE key.
This closes the file assigned to the current port, and creates a new
BLACK/MUTING file, which is loaded on the current port.
Notes
• The overall length of a new file is the length specified by the MAV-555
Expansion menu item 321 “LINEAR EDIT NEW FILE” plus 15 seconds.
For more details, see the MAV-555 Operation Manual.
• When the R key is not selected, the NEW FILE key is invalid.
For details of the “MAVE-F555 PORT” setting, see Section 3-4, “Recorder Selection
Function” (page 3-63).
Copying an existing file
You can copy an existing file on the MAV-555, and open it. This operation is
convenient in the following cases.
• When you create a single editing template file on the MAV-555, which
includes a title or color bars, and make a copy each time you start editing.
1
2