Filter
Top Products
Chapter 3 Operations for Linear/Nonlinear Editing 3-47 (E)
Opening the Original Material of the Current Cut
Hold down the SHIFT key and press the TRIM key.
If the original material of the current cut is on the MAV-555, the material is
cued up to the same position as the current cut and opened on the MAV-555
P2 port. If the original material is from an external VTR, the material is cued
up to the external VTR position.
Note
If multiple channels are preset on the MAVE-F555 and you open the original
material of a cut, the V, A1, A2, A3, A4 order of priority is used in cueing up
the material.
Trimming a Cut
Use the procedure below to trim a cut.
REDO
UNDO
V A1 A2 A3 A4
TRIM
MARK
SPLIT
MARK OUTMARK IN
REPLAY
PREVIEW
EXECUTE/
REC
SHIFT
R
STORE +
-
P1 P2 BG
PORT/FILE ASSIGN
1 Select the Recorder port.
1
3
5
6
7
2
4