Filter
Top Products
1-11
PFM-42B1, PFM-42B1E
20
(GB)
Watching the Picture
Input Signal and Monitor Status
Information Display
Input signal and monitor status information is
displayed on the monitor screen for about five seconds
when the power is turned on or when switching the
input signal.
To disable this function, follow the steps below.
1
In the CONFIG (1/2) menu, press v/ V to move
the cursor (B) to “DISPLAY” and press ENTER.
The following menu appears on the monitor
screen.
DISPLAY : ON
2
Press v/ V to set DISPLAY to OFF and press
ENTER.
The DISPLAY function is disabled.
To display the information
Set DISPLAY to ON in step 2 above. The factory
default is ON.
Note
You can display the input signal information and the
time anytime by pressing the DISPLAY button on the
Remote Commander, regardless of the above setting.
The input signal information list
31.5kHz/60Hz 16:30:40
INPUT1 RGB
Color system or horizontal/vertical frequency
Signal type
Time
21
(GB)
Watching the Picture
Preset input signals
Signal name
Color system or horizontal/
vertical frequency
Computer signals
1 VGA
a)
-1 (VGA 350) 31.5kHz 70Hz
2
640×350@85Hz (VESA
b)
STD)
37.9kHz 85Hz
3 640×400@85Hz (VESA STD) 37.9kHz 85Hz
4 640×480@60Hz (VESA STD) 31.5kHz 60Hz
5 Mac
c)
13
"
35.0kHz 67Hz
6 640×480@72Hz (VESA STD) 37.9kHz 73Hz
7 640×480@75Hz (VESA STD) 37.5kHz 75Hz
8 640×480@85Hz (VESA STD) 43.3kHz 85Hz
9 852×480@60Hz (I/O DATA)
d)
31.7kHz 60Hz
10 VGA (VGA TEXT) 31.5kHz 70Hz
11 720×400@85Hz (VESA STD) 37.9kHz 85Hz
12 800×600@56Hz (VESA STD) 35.2kHz 56Hz
13 800×600@60Hz (VESA STD) 37.9kHz 60Hz
14 800×600@72Hz (VESA STD) 48.1kHz 72Hz
15 800×600@75Hz (VESA STD) 46.9kHz 75Hz
16 800×600@85Hz (VESA STD) 53.7kHz 85Hz
17 Mac 16
"
49.7kHz 75Hz
18 1024×768@60Hz (VESA STD) 48.4kHz 60Hz
19 1024×768@70Hz (VESA STD) 56.5kHz 70Hz
20 1024×768@75Hz (VESA STD) 60.0kHz 75Hz
21 1024×768@85Hz (VESA STD) 68.7kHz 85Hz
22 1152×864@75Hz (VESA STD) 67.5kHz 75Hz
23 Mac 21
"
68.7kHz 75Hz
24 1280×960@60Hz (VESA STD) 60.0kHz 60Hz
25 1280×960@85Hz (VESA STD) 85.9kHz 85Hz
26
1280×1024@60Hz (VESA STD)
64.0kHz 60Hz
27
1280×1024@75Hz (VESA STD)
80.0kHz 75Hz
28
1280×1024@85Hz (VESA STD)
91.1kHz 85Hz
29
1600×1200@60Hz (VESA STD)
75.0kHz 60Hz
SDTV/HDTV
1 PAL PAL
2 NTSC NTSC
3 SECAM SECAM
4 NTSC4.43 NTSC/4.43
5 PAL60 PAL/60
6 PAL-M PAL-M
7 1080/24psf 1080/48I
8 1080/50i 1080/50I
9 575/50p 575/50P
10 480/60p 480/60P
11 1080/60i 1080/60I
12 720/60p 720/60P
a) VGA is a registered trademark of International Business
Machines Corporation, U.S.A.
b) VESA is a registered trademark of the Video Electronics
Standards Association.
c) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
d) This item is only available when you use a graphic
accelerator board manufactured by I/O DATA
Corporation.
Notes
•When inputting an HDTV signal, input the tri-level
sync signal to the 2nd pin of the INPUT1 or INPUT2
(D-sub 15-pin) connector.
•When inputting a computer signal at the resolution
shown in item No. 29, set H SIZE, H SHIFT, V
SIZE and V SHIFT to the standard (00) and set
ZOOM to ×1 in the PIC SIZE menu, or the picture
might oscillate.
Actual on-screen display of the monitor status
On-screen display Significance
31.5kHz / 60Hz (e.g.) The selected input signal is
computer RGB.
525 / 60 (e.g.) The selected input signal is RGB or
component video.
NTSC (e.g.) The selected input signal is NTSC.
OTHERS The input signal is out of the
capture range.
NO SYNC There is no input signal.
INPUT1 RGB The signal mode of INPUT1 is set to
RGB.
INPUT1 YUV The signal mode of INPUT1 is set to
component video.
VIDEO COMPOSITE Composite video input is selected
for VIDEO.
VIDEO Y/C Y/C video input is selected for
VIDEO.