Filter
Top Products
1-19
PFM-42B1, PFM-42B1E
36
(GB)
To change the index number
You can change the index number if necessary.
When you change the number, use the buttons on the
control button section of the monitor.
1
Press MENU.
The main menu appears on the monitor screen.
ENTER
MENU
MAIN MENU
INPUT SELECT
PIC CONTROL
PIC SIZE
CONFIG
MEMORY
REMOTE
STATUS
SELECT SET END
2
Press v/ V to move the cursor (B) to “REMOTE”
and press ENTER.
The REMOTE menu appears on the monitor
screen.
ENTER
MENU
REMOTE
INDEX No. : 001
REMOTE MODE : TV
REMOTE ONLY : OFF
SELECT SET END
3
Press v/ V to move the cursor (B) to “INDEX
No.” and press ENTER.
The following menu appears on the monitor
screen.
INDEX No. : 001
4
Select the index number with v/ V and press
ENTER.
The menu returns to the REMOTE menu.
Operating a Specific Monitor With the Remote Commander
2
Input the index number of the monitor you want to
operate using the 0
– 9 buttons on the Remote
Commander.
The input number appears right next to the index
number of each monitor.
INDEX No.117 117
3
Press ID MODE SET.
The character on the selected monitor changes to
cyan while the others change to red.
You can operate only the monitor specified. (All
operations are available in ID mode except power
on/off.)
4
After the necessary adjustment, press ID MODE
OFF.
The monitor returns to the normal mode.
Input number
37
(GB)
Remote Commander model RM-854 RM-921 RM-1271 RM-PJ1292 RM-PJ1000
REMOTE MODE setting TV TV PJ PJ PJ
Input selection INPUT1 RGB RGB1 A A A
INPUT2 — RGB2 B B B
VIDEO LINE1 LINE VIDEO VIDEO VIDEO
Menu operation MENU MENU MENU PAGE or < PAGE or < MENU or <
ENTER ENTER ENTER ,,ENTER or ,
v + SELECT+MM M M
V – SELECT–mm m m
Picture adjustment Contrast CONTRAST+/–— CONTR+/– CONTR+/– CONTR+/–
Chroma CHROMA+/–— COLOR+/– COLOR+/– COLOR+/–
Phase PHASE+/–— HUE+/– HUE+/– HUE+/–
On-screen information DISPLAY DISPLAY — STATUS ON STATUS ON
Using Other Remote Commander Models
Using Other Remote
Commander Models
The following operations can be carried out using
other Remote Commander models.
•Power on/off
•Input selection
•Menu operations
•Picture adjustments: contrast, phase and chroma
•On-screen display on/off
The operations available and the buttons to be used
for each operation are limited depending on each
Remote Commander. See the table below.