Filter
Top Products
1-13
PFM-42B1, PFM-42B1E
24
(GB)
2
Press
v/ V
.
“NO” changes to “YES”.
ENTER
MENU
RESET : YES
SELECT SET END
3
Press ENTER.
The PIC CONTROL menu items are restored.
To cancel the reset function
Press MENU before pressing ENTER.
Resizing and Positioning
the Picture
You can shift the position of the picture so that it fits
the screen, or adjust the vertical and horizontal size of
the picture separately.
Resizing the Picture
1
Press MENU.
The main menu appears on the monitor screen.
ENTER
MENU
MAIN MENU
INPUT SELECT
PIC CONTROL
PIC SIZE
CONFIG
MEMORY
REMOTE
STATUS
SELECT SET END
2
Press
v/ V
to move the cursor (B) to “PIC SIZE”
and press ENTER.
The PIC SIZE menu appears on the monitor
screen.
ENTER
MENU
PIC SIZE
HSIZE : 00
HSHIFT : 00
VSIZE : 00
VSHIFT : 00
RESET
ASPECT : 4X3
ZOOM : X1
PIXEL ADJUST
SELECT SET END
3
Press
v/ V
to move the cursor (B) to “H SIZE”
and press ENTER.
The following menu appears on the monitor
screen.
HSIZE : 00
4
Press
v/ V
to resize the picture.
v
: to increase the horizontal size
V
: to reduce the horizontal size
The horizontal picture size is indicated on the
monitor screen in the range from MIN (
–50) to
MAX (+50). The factory preset value is 00.
Note
The lower limit of the setting may be above the MIN
depending on the input signal type.
5
Press ENTER.
The menu returns to the PIC SIZE menu.
Adjusting the Picture / Resizing and Positioning the Picture
25
(GB)
6
Press
v/ V
to move the cursor (B) to “V SIZE”
and press ENTER.
The following menu appears on the monitor
screen.
VSIZE : 00
7
Press
v/ V
to resize the picture.
v
: to increase the vertical size
V
: to reduce the vertical size
The vertical picture size is indicated on the
monitor screen in the range from MIN (
–50) to
MAX (+50). The factory preset value is 00.
8
Press ENTER.
The menu returns to the PIC SIZE menu.
Adjusting the Picture Position
1
In the PIC SIZE menu, press
v/ V
to move the
cursor (B) to “H SHIFT” and press ENTER.
The following menu appears on the monitor
screen.
HSHIFT : 00
2
Press
v/ V
to shift the picture.
v
: to shift the picture to the right
V
: to shift the picture to the left
The horizontal picture position is indicated on the
monitor screen in the range from MIN (
–50) to
MAX (+50). The factory preset value is 00.
3
Press ENTER.
The menu returns to the PIC SIZE menu.
4
Press
v/ V
to move the cursor (B) to “V SHIFT”
and press ENTER.
The following menu appears on the monitor
screen.
VSHIFT : 00
5
Press
v/ V
to shift the picture.
v
: to shift the picture upward
V
: to shift the picture downward
The vertical picture position is indicated on the
monitor screen in the range from MIN (
–50) to
MAX (+50). The factory preset value is 00.
6
Press ENTER.
The menu returns to the PIC SIZE menu.
Restoring the Original Picture Size
and Position
1
In the PIC SIZE menu, press
v/ V
to move the
cursor (B) to “RESET” and press ENTER.
The following menu appears on the monitor screen.
ENTER
MENU
RESET : NO
SELECT SET END
2
Press
v/ V
.
“NO” changes to “YES”.
ENTER
MENU
RESET : YES
SELECT SET END
Resizing and Positioning the Picture