Sony MZ-N505 DVD Recorder User Manual


 
43-GB
1 While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
MK ON appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 30).
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows:
You cannot erase a track mark on a track
that has been checked-out from your
computer.
1 While playing the track with the track
mark you want to erase, press X to
pause.
2 Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. 00:00 appears in the display.
MK 003 appears in the display for
2 seconds.
3 Press T MARK to erase the mark.
MK OFF appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, name assigned to
the mark is also erased.
T MARK
1 3 42
1 32
Erase a track mark
Track numbers decrease
X
T MARK
.