Sony MZ-N505 DVD Recorder User Manual


 
56-GB
An MD is not played
from the first track.
Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing.
Group mode is turned on.
, Turn group mode off and play from the first track (press N
for 2 seconds or more to start playing).
Playback sound
skips.
The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
A very short track may cause sound to skip.
, Try not to create a track under one second long.
Sound has a lot of
static.
Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong
magnetism.
Cannot find the track
marks.
You pressed X after pressing . or >.
, Press X before pressing . or >.
The disc cannot edit
on other component.
The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4
stereo.
Momentary noise is
heard.
Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
The display window
is not normal.
The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power
source, reconnect it, and then press any of the operation
buttons.
Symptom Cause/Solution