Sony MZ-N505 DVD Recorder User Manual


 
44-GB
Notes
When you erase a track mark between the two
consecutive tracks that are registered into
different groups while group mode is off, the
second track is re-registered into the group
containing the first track. In addition, if you
combine a track that is registered to a group
with a track that is not registered to a group
(two consecutive tracks), the second track
takes the same registration setting as the first
track. However, when group mode is on, you
can only combine tracks within the selected
group.
You cannot erase track marks according to the
system limitations. For details, see System
limitations (page 52).
Erasing tracks
Note
You can not erase tracks that have been checked
out from your computer. You can not erase a
group or an entire disc if it contains a checked-
out track. In this case, check in the track or
tracks to OpenMG Jukebox.
To erase a track
Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1 While playing the track you want to
erase, press MENU.
2 Press . or > repeatedly until
EDIT flashes in the display, and
then press ENTER again.
“” and T:Name flash in the
display, and the recorder plays the
selected track repeatedly.
3 Press . or > repeatedly until
“” and T:Ers flash in the
display, and then press ENTER.
Erase? and ENTER appear
alternately in the display.
4 Press ENTER again.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 42).
To cancel erasing
Press CANCEL in step 3.
To erase the whole disc
You can quickly erase all the tracks and
data of the MD at the same time.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the disc before you erase it.
1 Play the disc you want to erase to
check the contents.
2 Press x to stop.
3 While the recorder is stopped, press
MENU.
./>
MENU/ENTER
GROUP/
CANCEL