Filter
Top Products
54
Timer Recording (GUIDE
Plus+/VIDEO Plus+/
Manual)
There are three methods to setting the timer
within the GUIDE Plus+ system: One Button
Recording, VIDEO Plus+, and setting the
timer manually.
b Notes
• When the recorder is connected to a set top box
receiver and you want to record using the GUIDE
Plus+ system, turn on the set top box receiver and
connect the set top box controller.
• Do not operate your set top box receiver just
before or during a timer recording. This may
prevent the accurate recording of a programme.
You can use the GUIDE Plus+ system to set
the timer to record a programme up to seven
days in advance.
1 Press TV GUIDE.
2 Select a programme using </M/m/
,.
To search for a programme by category
or by keyword, select “Search” in the
Menu Bar. See “Searching for a
Programme using the GUIDE Plus+
System” on page 47 for more
information about searching for a
programme.
You can select a programme from “My
TV.”
3 Press the red button (“Record”).
The set programme and Time Slot
change colour and the recorder is ready
to start recording. When recording from a
set top box receiver, be sure to turn it on.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
• To record on a DVD
See “Checking/Changing/Cancelling
Timer Settings” on page 59.
• To make more detailed timer settings
See “Checking/Changing/Cancelling
Timer Settings” on page 59.
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings” on page 59.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording, and that the
recording cannot be stopped within the first
minute of recording.
One Button Recording (GUIDE
Plus+)
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
HDD
-
R
Video
</M/m/,
x REC
STOP
TV GUIDE
Colour
buttons