Filter
Top Products
96
3
Select the TV guide page number you
want to modify, and press ENTER.
4 Press the number buttons or </M/m/,
to enter the TV guide page number, and
press ENTER to confirm the setting.
• If you make a mistake, re-enter the
correct number.
• To return to the original settings, press
O RETURN.
5 To set or change another TV guide page
number, repeat steps 3 and 4 above.
z Hint
To view Teletext information on your TV screen
during a broadcast, switch to your TV’s tuner by
pressing TV/DVD.
b Notes
• In step 4 above, enter “000” if you do not want to
use the TV guide page number for automatic
labelling. The recorder will instead store a default
title name (programme position, start time - stop
time).
• Refer to the Teletext information on your TV
screen to obtain the TV guide page number with
programme titles and their start times.
• If the Teletext TV guide has a page which always
shows the programmes for the current day, this
page should be input for all days.
• If you start recording more than three minutes
before the programme is scheduled to start, the
correct label information may not be transferred.
• Note that this function may not work correctly
with programmes broadcast from some stations.
• If the broadcast system updates the Teletext
information at the moment recording starts, the
title label may not correspond to the recorded
programme. In this case, you may have to
manually enter the correct title (page 38).
Auto Adjust
Turns on the Auto Clock Set function when a
programme position in your local area
broadcasts a time signal.
1 Select “Clock” in “Basic,” and press
ENTER.
2 Select “Auto Adjust,” and press ENTER.
3 Select “On,” and press ,.
4 Press M/m repeatedly until the
programme position of the station that
carries a time signal appears, and press
ENTER.
• If the recorder does not receive a time
signal from any station, “Auto Adjust”
returns to “Off” automatically and the
menu for setting the clock manually
appears on the screen.
z Hint
If you set “Auto Adjust” to “On,” the Auto Clock
Set function is activated whenever the recorder is
turned off.
b Note
The Auto Clock Set function does not work while
the recorder is standing by for Synchro-Recording.
Clock