Filter
Top Products
115
Additional Information
, The DivX video file is larger than 720 (width) ×
576 (height)/2 GB.
, The DivX video file is longer than ten hours.
, The data is not formatted in DivX format even
though it has the extension “.AVI” or “.DIVX,”
or is in DivX format but does not conform to a
DivX Certified profile.
, When playing a disc containing MP3 tracks or
JPEG files, “DivX” is not selected (page 45).
The title/track/file names are not correctly
displayed.
, For some discs, the recorder can only display
numbers and alphabet. Other characters are
displayed as asterisks.
DVD Recording/Timer recording/
Editing
The programme position cannot be changed
from the channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after
z REC is pressed.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INF WRITE” disappears from
the front panel display.
Nothing was recorded even though the timer
setting is set correctly.
, The recorder was already turned on at the timer
recording start time. Set the recorder to standby
mode before timer recording starts.
, There was a power failure during recording.
, Disconnect the mains lead from the mains, and
connect it again.
, The programme contains copy protection signals
that restrict copying.
, The programme that starts first has priority and
the second programme starts recording only after
the first programme has finished. If the
programmes start at the same time, the
programme listed first in the menu has priority
(page 53).
, There is no DVD inserted in the recorder.
, There is not enough disc space for the recording.
Recording does not stop immediately after
x (stop) is pressed.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure. The clock is automatically set by
PDC/VPS (page 102), but it is displayed as
“--:--” or is not correctly reset in the case of PDC/
VPS signal not being received. Reset the clock
(page 102).
, The programme that starts first has priority and
the second programme starts recording only after
the first programme has finished. If the
programmes start at the same time, the
programme listed first in the menu has priority
(page 53).
, There is not enough disc space for the recording.
The c indicator flashes after timer recording is
set.
, Insert a recordable disc (page 30).
, Insert a disc with any space for the recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 71).
The SYNCHRO REC indicator flashes after
Synchro-Recording is set.
, Insert a recordable disc (page 30).
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 71).
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
VCR Playback
The playback picture does not appear on the TV
screen.
,
Make sure the TV is set to the channel for the VCR.
If you are using a monitor, set it to video input.
The picture is not clear.
, Adjust the tracking by the TRACKING +/–
button.
, Set “Colour System” in the “Features” setup
correctly to match the colour system that the tape
was recorded in (page 108).
,continued