Filter
Top Products
88
Recording From Connected
Equipment Without a Timer
You can record from a connected VCR or similar
device. For connection details, see “Connecting
Another VCR or Similar Device” on page 27.
1 Press VIDEO to operate the VCR.
2 Insert a tape with its safety tab in place.
3 Press INPUT repeatedly to select an input
source according to the connection you
made.
The front panel display changes as follows:
4 Press REC MODE repeatedly to select the
recording mode, “SP” or “LP.”
5 Insert the source tape into the connected
equipment and set to playback pause.
6 Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
To stop recording, press x on this recorder.
Notes
• A video game image may not be recorded clearly.
• You cannot record on a tape with its safety tab
removed.
• During recording or recording pause, you cannot
change the recording mode.
• You cannot change the recording mode, programme
position, or input source while recording.
11 22 33
44 55 66
77 88
00
99
INPUT
VIDEO
z REC
x
REC MODE
LINE2LINE1
LINE3
Programme
position