Sony RDR-VX450 DVD VCR Combo User Manual


 
91
Dubbing (TAPE y DVD)
4 Press TOP MENU or TITLE LIST to select a
title.
5 Start playing the DVD, and then press x
(stop) or X (pause) at the point where you
want to start dubbing.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 36).
6 Press DVD t on the recorder.
Dubbing starts.
To stop dubbing
Press x.
Note that it may take a few seconds for the
recorder to stop dubbing.
To dub using the on-screen menu
1 After step 5 above, press SYSTEM MENU.
2 Select “Dubbing” from the System Menu, and
press ENTER.
3 Select “Simple Dubbing,” and press ENTER.
4 Select “DVD t VIDEO,” and press ENTER.
The display asks for confirmation.
5 Select “Yes,” and press ENTER.
Dubbing starts.
If the disc’s menu appears when DVD
playback finishes, press x to stop dubbing.
Otherwise the disc’s menu is recorded until
the tape reaches its end.
z Hints
The brightness of the playback picture may differ from
normal DVD playback picture.
The DVD playback time may differ slightly from the
VHS tape counter value.
The sound being played back (main, sub, etc.) is the
dubbed sound.
Notes
Dubbing cannot be made when “Progressive” is set to
“On” in the “Video” setup (page 104).
Dubbing stops when:
– the DVD is played back to the end and stops.
– the DVD deck or the VHS video deck is stopped.
– the tape remaining time runs out.
The System Menu, OPTIONS menu, and information
display are not displayed during dubbing.
Copyrights
– Recordings made from discs and other copyrighted
material are solely for individual enjoyment, and
other unauthorized use is prohibited under copyright
law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
Dubbing selected titles and scenes
(Programme Dubbing)
You can select titles or scenes from a DVD, and
dub the contents to a VHS tape all at once.
1 Press VIDEO and insert a VHS tape with its
safety tab in place.
To select the recording mode, SP or LP, press
REC MODE repeatedly.
2 Press DVD and insert a source disc.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 36).
3 Press SYSTEM MENU.
The System Menu appears.
4 Select “Dubbing,” and press ENTER.
5 Select “Program Dubbing,” and press
ENTER.
Dubbing
Simple Dubbing
Program Dubbing
DV Dubbing
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
VIDEO --> DVD
DVD --> VIDEO
Dubbing
Simple Dubbing
Program Dubbing
DV Dubbing
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
Program Dubbing
Create Dubbing List
Program Dubbing List
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
,continued