Filter
Top Products
84
5 Press ENTER.
The date, start and stop times, programme
position, recording mode, PDC/VPS setting
(page 83), etc. appear.
• If you want to change the setting, press </
, to select the item and press M/m to
change the setting.
To re-enter the PlusCode number, press
CLEAR.
6 Select “VCR” for “Media,” and press
ENTER.
The Timer List menu (page 86) appears.
If timer settings overlap, the message appears.
To change or cancel a timer recording, select
“Edit” from the Timer List (page 86).
7 Press SYSTEM MENU to turn off the menu.
8 Press )/1 (on/standby) to turn off the
recorder.
The c indicator lights up in the front panel
display, and the recorder is ready to start
recording.
If the c indicator flashes in the front panel
display, check that a tape with its safety tab in
place is inserted.
To stop recording
Press x twice.
If timer settings overlap
See page 82.
To change or cancel timer recording
See “Changing or Cancelling VCR Timer Settings
(Timer List)” on page 86.
z Hints
• You can use the recorder after setting the timer. Just
press )/1 to turn on the recorder. Turn off the recorder
to return it to recording standby before the timer
recording starts.
• When the start time and the programme position or
input source to be recorded are the same but the
“Media” setting differs, the programme is recorded to
both the DVD disc and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select “Timer,” and select “Timer - VIDEO Plus+.”
Notes
• To record a satellite programme, turn on the satellite
tuner and select the satellite programme you want to
record. Leave the satellite tuner turned on until the
recorder finishes recording. If you connect equipment
with a timer function, you can use the Synchro Rec
function.
• Even when correctly set, the programme may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
• Before the timer recording starts, “TIMER REC”
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes.
01 VCR 04/15 09:00 10:00
--- --/-- --:-- --:-- ---- ---04
--- --/-- --:-- --:-- ---- ---05
--- --/-- --:-- --:-- ---- ---06
03 --- --/-- --:-- --:-- ---- ---
02 VCR 04/30 09:15 09:45
No Date Start Mode
---
---
---
---
SP
SP
Off
Off
Edit
Timer – Standard
10:10
Prog. 1
Prog. 2
Media Stop Prog.
PDC
/VPS
No.01
:
VCR
:
15/04 09 00 10 00 Prog. 1 SP
Media Date Start Prog. Mode
Off
VIDEO Plus+
End
PDC
/VPS