Filter
Top Products
23
Hookups and Settings
To check the command mode for the recorder
Press x (stop) on the recorder when the recorder
is turned off. The command mode for the recorder
appears in the front panel display.
Changing programme positions of
the recorder using the remote
You can change programme positions of the
recorder using the number buttons.
Example: for programme position 50
Press “5,” “0,” then press SET.
z Hint
The programme position automatically changes three
seconds after you enter the numbers without pressing
SET.
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
recorder. If you do not complete Easy Setup, it
will appear each time you turn on your recorder.
Settings are made in the following order.
m
m
m
m
m
m
1 Turn on the TV.
2 Press "/1.
The recorder turns on.
If the command mode for the recorder has not
been changed, set the command mode for the
remote to the default setting of DVD3. If the
command mode for the remote is changed to
DVD1 or DVD2, you will be unable to operate
this recorder.
11 22 33
44 55 66
77 88
00
99
Number
buttons
SET
OSD Language Setup
Tuner and Channel Setup
Clock Setup
TV Type Setup
Video Connection Setup
Audio Connection Setup
Finished!
11 22 33
44 55 66
77 88
00
99
M/m/</,,
ENTER
O RETURN
"/1
,continued