Filter
Top Products
Chapter 4: Using the System Features
27
Using the On-Screen Displays: Highlight and Select
All of the features and functions of the DSS receiver can be operated
using a simple, two-step process: Highlight and Select. These two steps
are explained below.
Step 1: Highlight
To highlight, move the joystick on the remote to move the on-
screen to the item that you want to select.
Step 2: Select
After you’ve highlighted the item that you want, select it by
pressing the joystick.
Example: Highlight and Select
1
In the sample menu that follows, moving the joystick up moves the
highlight from ITEM 5...
... to ITEM 2.
2
Pressing the joystick selects ITEM 2.
You can apply this basic operation of highlighting and selecting to
perform any of the system’s functions.
highlight
ITEM 2
ITEM 5
ITEM 1
ITEM 4
ITEM 7 ITEM 8
ITEM 3
ITEM 6
ITEM 9
SAMPLE MENU
Tip
In many of the on-screen displays you
can move the joystick in eight
directions: left, right, up, down, and
diagonally (up left, up right, down
left, and down right).
ITEM 1
ITEM 4
ITEM 7
ITEM 2
ITEM 5
ITEM 8
ITEM 3
ITEM 6
ITEM 9
SAMPLE MENU