Filter
Top Products
Chapter 4: Using the System Features
45
5
Set the day, start time, stop time, and channel number as follows:
To set each item (day, time, channel), move the joystick up and
down.
To move to the next or previous item, move the joystick right
left and right.
Note
You can set the timer up to 30 days in advance. You can also set the timer for
every day or for the same day(s) every week. See “Setting the Daily/Weekly
Timer” below.
6
Select OK to save your selections and return to the System Menu.
Or, to make additional timer settings, repeat steps 4 through 6.
Setting the Daily/Weekly
Timer
To set the timer for every day or for the same day(s) every week:
1
In step 5 (above), move the joystick down repeatedly to select one
of the DAY options, which are displayed in the following sequence:
Current Date
SUN-SAT
MON-SAT
MON-FRI
EVERY SAT ...
EVERY MON
EVERY SUN
1 Month Later
(Cycles backward)
Current Date
2
Set the start time, stop time, and channel as described in step 5
above, ten select OK to save your changes and return to the System
Menu.
TIMER SETUP
OK
SUN-SAT
-:-- -:-- --- ----
-/-- -:-- -:-- --- ----
-/-- -:-- -:-- --- ----
-/-- -:-- -:-- --- ----
-/-- -:-- -:-- --- ----
-/-- -:-- -:-- --- ----
-/-- -:-- -:-- --- ----
CANCEL
CLEAR
1
HELP
DAY START STOP CH# STATION
With the DAY item highlighted, move
the joystick down repeatedly to cycle
through all the available DAY options.
2
3
4
5
6
7