Filter
Top Products
15
Getting Started
5 Insert a disc with the playback side facing left.
Notes
• Make sure you have inserted the disc into each slot at a
right angle to the rotary table. If the disc is not put in
straight, it may damage the player or the disc.
• Make sure the rotary table comes to a complete stop before
inserting or removing discs.
6 Repeat Steps 4 and 5 to insert more discs.
7 Close the front cover by pressing right edge of the
cover until it clicks.
The rotary table turns and the disc slot at the loading
position is set to the playing position.
Always close the front cover except when you insert or
remove discs.
z
You can select a disc slot number by skipping by 10 slots
When you select the disc slot number in Step 4, press DISC SKIP
+/– on the remote. Ten disc slots each before and after from the
current disc slot number will be skipped.
z
You can select slot 1 directly
Press EASY PLAY in Step 4. The rotary table turns and slot 1
comes to the loading position.
Inserting Discs
You can insert up to 200 discs into this player.
1 Press 1/ u (POWER) to turn on the player.
2 Press §OPEN.
3 Press the dial function select button to turn the
DISC CHANGE indicator on.
4 Turn the =/ + dial until you find the disc slot
where you insert a disc, while checking the disc
slot number indicated in the front panel display or
by the slot.
With the playback
side facing left
1/u (POWER)
Front cover
§OPEN
Playing position
Rotary table
Loading position
Front cover
Disc slot number
Disc slot at the loading position
DISC CHANGE
indicator
Dial function
select button
=/+ dial