Filter
Top Products
70
Settings and Adjustments
Operation
Press the number button on the
remote and ENTER, or >/. and
ENTER, or turn the click shuttle of
the player slowly.
Press the dial function select button
to turn the DISC CHANGE
indicator on, then turn the =/
+ dial and press it.
Press ?//, then press ENTER.
Press p.
Press P.
Press P or ·.
On the player:
Press the dial function select button
to turn the DIRECT SEARCH
indicator on, then turn the =/
+ dial clockwise.
On the remote:
Press +.
On the player:
Press the dial function select button
to turn the DIRECT SEARCH
indicator on, then turn the =/
+ dial counterclockwise.
On the remote:
Press =.
Controlling the CD Changer (Mega Control)
Controlling the CD changer
The controls indicated below are effective while the
MEGA CONTROL button is lit.
MEGA CONTROL
P
p
>/./?//
ENTER
pP·
·
=/+
MEGA CONTROL
Click shuttle
1 Set the command mode selector of the CD changer
to “CD 3.”
2 Turn on the player and the CD changer.
3 Press MEGA CONTROL.
The MEGA CONTROL button of the front panel lights
up and the display shows the current disc number of
the CD changer.
4 Select the play mode you want on the CD changer.
5 Press · on the player to start playing.
The playback starts and the display shows the current
disc and track numbers and the playing time of the
track.
While the MEGA CONTROL button of the front panel
is lit, you can control the CD changer with the controls
on the player as follows:
=/+ dial
Number
buttons
ENTER
Dial function
select button
123
4
5
6
789
0
A B C D ALL
DVD CD
To
Select a disc in
continuous play mode
Skip by 10 discs in
continuous play mode
Stop
Pause
Resume play after pause
Go to the next track
Go back to the preceding
track
To control the player again
Press MEGA CONTROL on the player or the remote.
The MEGA CONTROL button goes off and you can
control the player.
Notes
• Connect only a Sony CD changer of 5/50/200/300 discs to the
MEGA CONTROL jack.
• You cannot locate a particular point in a track of the CD
changer using the controls on the player.
• Depending on the CD changer, some controls on the player
may not operate the CD changer as they do the player.
• You cannot control the player when the MEGA CONTROL
button on the front is lit.
• The player will not enter Resume Play after the MEGA
CONTROL button on the front has been turned on and off.
• You cannot control the CD changer right after turning on the
player or connecting the CD changer. Wait a few seconds until
the player recognizes the CDs.