Filter
Top Products
49
Using Various Functions with the Control Menu
ENHANCED SURROUND
Provides a greater sense of presence from Pro Logic
source with monaural rear channel sound. Produces a
stereo like effect in the rear channels.
VIRTUAL REAR SHIFT
Uses 3D sound imaging to shift the sound of the rear
speakers away from the actual speaker position. The
virtual speakers are reproduced as shown in the
illustration below. The shift position differs according to
the setting of the rear speaker position.
VIRTUAL MULTI REAR
Uses 3D sound imaging to create an array of virtual rear
speakers from a single pair of actual rear speakers. The
virtual speakers are reproduced as shown in the
illustration below. The position of the virtual rear
speakers differs according to the setting of the rear
speaker position.
* See page 65 for details on how to set the rear speaker position.
L: Front speaker (left)
R: Front speaker (right)
SL: Rear speaker (left)
SR: Rear speaker (right)
: Virtual speaker
L
SL
SR
R
SL SR
LR
LR
SL
SR
L
SL SR
R
Side* Rear*
Side* Rear*
Notes
• Some discs do not have rear sound. In this case, you cannot get
the 3D surround effect.
• When you select an item, the sound cuts off for a moment.
• When the playing signal does not contain the surround
component, the effects may be difficult to hear even if you
select “VES A” or ”VES B.”
• If you connect the front speakers only, “NORMAL
SURROUND,” ”ENHANCED SURROUND,” ”VIRTUAL
REAR SHIFT” and “VIRTUAL MULTI REAR” cannot be
selected.
• Set the front speakers to form an equilateral triangle including
the listening position, or the effects may be difficult to hear
even if you select “VES A” or “VES B.”
• In case that the player outputs the signal from DIGITAL OUT
(OPTICAL, COAXIAL), the surround effect will be heard only
when you set “DOLBY DIGITAL” to “D-PCM” in “AUDIO
SETUP.”
• When you play sound tracks with 96 kHz sampling frequency,
be sure to select “OFF,” or the output signals will be converted
to 48 kHz (sampling frequency). (Except when the player
outputs the audio signal from DIGITAL OUT (OPTICAL,
COAXIAL).)
• When you connect a center speaker and a subwoofer, you can
also hear the sound from the center speaker and the subwoofer.
When you select “VES A” or “VES B,” the player does not
output the sound from the center speaker.
• When you select “VES A” or “VES B,” set the surround settings
of the connected units such as the amplifier to OFF.