Filter
Top Products
Basic Operations
14
GB
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press 1/u to turn on the player.
The indicator (red) above the 1/u button changes to green and
the front panel display lights up.
Press §, and place the disc on the disc tray.
Press ·.
The disc tray and front panel close, and the player starts
playback (Continuous Play). Adjust the volume on the TV or
the amplifier.
To open or close the front panel
Press UP/DOWN on the player.
Playing a CD/VIDEO CD
1
• The operating procedure of DVDs
is different from that of CDs or
VIDEO CDs.
For details, see pages 10 to 13.
z You can turn on the player
using the remote
Press 1/u when the
indicator above the 1/u
button on the front panel is
lit in red.
* Do not play DTS sound tracks
on a CD without connecting
the player to an audio
component with a built-in DTS
decoder. DTS indicator does
not light up when you play
DTS sound tracks on a CD,
even if the player outputs DTS
signals via the DIGITAL OUT
OPTICAL and COAXIAL
connectors. In this case, a loud
noise will come out from the
LINE OUT (AUDIO) and
PHONES connectors. To enjoy
the DTS sounds, you have to
connect an audio component
with a built-in DTS decoder
(see page 33).
z After following Step 4
The menu screen may
appear on the TV screen
depending on the VIDEO
CD. You can play the disc
interactively, following the
instructions on the menu
screen. (PBC Playback, see
page 17.)
2
24
3
3
4
With the label side
facing up
Basic Operations
Depending on the VIDEO CD, some operations may be different or restricted. Refer to the instructions supplied
with your disc.
Connect headphones.
Adjust the headphone
volume.
DTS indicator*
UP/DOWN