Sony PFM-50C1 Flat Panel Television User Manual


 
7 (GB)
Location and Function of Parts and Controls
Location and Function
of Parts and Controls
Front / Rear / Right Side
Front
Right side
Rear
1 1 (standby) switch / indicator section
For details on the 1 (standby) switch / indicator section,
see “1 (standby) Switch / Indicator Section” on page 8
(GB).
2 Control button section
For details on the control button section, see “Control
Button Section (Top)” on page 8 (GB).
3 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the STANDBY indicator lights up in red and the
display turns to the standby mode.
For more details on the power cord, see “Connecting the
AC Power Cord” on page 14 (GB).
4 SPEAKER Socket
The audio component of the signal displayed on the
screen is output when speakers (not supplied) are
connected to this socket.
5 Stand installation hooks
Use these hooks to install the stand (not supplied).
6 Connector panel
For details on the connector panel, see “Connector Panel”
on page 9 (GB).
O
N
S
TAN
D
B
Y
1
5
34
2
6
The shaded areas shown in the illustration above are all
ventilation holes.