Filter
Top Products
39 (GB)
Using the Memory
Function
You can save the current picture setting for each input
signal using the Memory function. The saved settings
can be restored whenever necessary. The items in the
Picture/Sound Control and Screen Control menus can
be memorized. You can save the picture settings of up
to twenty input signals. You can name the settings of
the items (up to 6 characters in length).
Storing the Current Setting
1 Press MENU.
The main menu appears on the display panel.
,toselect, ,to
ENTER
Picture/Sound Control
Picture Mode :Standard
Adjust Picture
Adjust Sound
enter adj. menu
2 Press
M
/
m
to move the cursor (yellow) to “User
Memory” and press ENTER.
The User Memory menu appears on the display
panel.
,toselect, , to
ENTER
User Memory
Load
Save
enter set menu
3 Press
M
/
m
to move the cursor (yellow) to “Save”
and press ENTER.
The following menu appears on the display panel.
,toselect item
User Memory
Save
MEM 01
MEM 02
MEM 03
MEM 04
MEM 05
MEM 06
MEM 07
MEM 08
4 Select a memory number (01 to 20) with
M
/
m
and
press ENTER.
The following menu appears on the display panel.
User Memory
Save
MEM 01
Save
Name Set
set
,toselect, ,to
ENTER
5 Press
M
/
m
to move the cursor (yellow) to “Save”
and press ENTER.
The following menu appears on the display panel.
User Memory
Save
MEM 01
Save
Name Set
Cance l
OK
,toselect,press
to return
ENTER
6 Press M/m to move the cursor (yellow) to “OK”
and press ENTER.
The current data is stored under the selected
memory number.
Using the Memory Function