Filter
Top Products
20 (GB)
Using On-screen Menus
Treble
Press M/, to increase the treble and press m/< to
decrease it.
Bass
Press M/, to increase the bass and press m/< to
decrease it.
Balance
Pressing M/, increases the volume on the right side,
while pressing m/< increases the volume on the left
side.
Surround
The surround function can be set to one of four levels
consisting of “Off”, “Hall” and “Sim”.
For details, see “Surround” on page 38 (GB).
Reset
Restore the factory setting in the Adjust Sound menu
items.
For details on using the reset function, see “Restoring the
Adjust Sound Menu Items to Their Original Settings” on
page 38 (GB).
Screen Control menu
This menu is used for resizing and positioning the
picture.
The screen and operating method of the Screen
Control menu vary according to the setting of the
MENU Function.
Case of MENU Function being set to “On/Off”
(setting when shipped from the factory)
Screen Control
Wide Setup
Wide Mode:4/3
Screen Zoom :
Screen Size
Screen Shi ft
Adjust Pixel
Reset
enter set menu
,toselect, ,to
ENTER
Case of MENU Function being set to “Return”
Screen Control
Wide Setup
Wide Mode:4/3
Screen Zoom :
HSize
VSize
HShift
VShift
Adjust Pixel
enter set menu
,toselect, ,to
ENTER
Screen Control
Wide Mode:4/3
Screen Zoom :
HSize
VSize
HShift
VShift
Adjust Pixel
Reset
set
,toselect, ,to
ENTER
Wide Setup
Sets the Auto Wide function. The Auto Wide function
is a function which chooses from among ordinary
television broadcasts, Wide Clear Vision, or wide
screen images, all having different proportions for
horizontal and vertical display, and automatically
expands the picture to a wide screen image with a
16:9 aspect ratio, enabling the most appropriate
display of different types of images.
For details, see “Setting Auto Wide” on page 34 (GB).
Wide Mode
Switches the wide screen display to match the size
and type of the picture.
For details, see “Setting the Wide Mode” on page 35 (GB).
Screen Zoom
Enlarges the image (in order) to double (×2), triple
(×3) and quadruple (×4).
Note
The enlargement settings can only be used when the
Wide Mode is set to “Restore”.