32 (GB)
Color Temp.
You can also set the color temperature. You can select
Cool, Neutral or Warm, or adjust each gain more
precisely. Up to three adjusted color temperatures can
be registered. You can rename them (up to six
characters in length).
1 Select “Color Temp.” with
M/m
and press
ENTER.
2 Select the color temperature with
M/m
and press
ENTER.
Cool: to set the color temperature to high
Neutral: to set the color temperature to neutral
Warm: to set the color temperature to low
User1 – 3: to set the gain more precisely
When you select Warm, Neutral or Cool, the
menu returns to the Adjust Picture menu.
When you select “User1” to “User3”
When you select “User1” to “User3”, the
following menu appears on the display panel.
Picture/Sound Control
Adjust Picture(User1)
Red Ga in
Green Gain
Blue Gain
Name Set
Color Temp. : User1
set
,toselect, ,to
ENTER
(1) Press
M/m
to move the cursor (yellow) to the
gain item that you want to set and press
ENTER.
The following menu appears on the display
panel.
Red Ga in 00
(2) Adjust the gain (0 to 255) with
M/m/</,
and press ENTER.
The menu returns to the Color Temp. menu.
When you rename the adjusted color temperature,
follow the steps below.
(3) Press
M/m
to move the cursor (yellow) to
“Name Set” and press ENTER.
The following menu appears on the display
panel.
Picture/Sound Control
Adjust Picture(User1)
Color Temp. : User1
Name Set
0123456789ABCDEFGH
IJKLMNOPQRSTUVWXYZ
abcdefghi jklmnopqr
stuvwxyz()[]<>+– /
=% &; : . ' , End
set
,,, toselect, to
ENTER
Character list
(4) Select a character or symbol in the character
list with
M/m/</,
and press ENTER. The
selected character is input. If you make a
mistake, select [<] on the screen to
backspace the cursor one character, then
correct the error.
When [MENU Function] (page 23 (GB)) on the
Initial Setup menu has been set to [Return], the M/
m buttons on the Remote Commander move the
cursor left and right. To make the M/m buttons
move the cursor up and down, set [MENU
Function] to [On/Off].
(5) Repeat steps (4) and after you have finished
entering the name, select “end” and press
ENTER.
The menu returns to the Color Temp menu.
Adjusting the Picture