Filter
Top Products
22 (GB)
Using On-screen Menus
Custom Setup menu
Reduces power consumption or sets a screen saver
and so forth.
Custom Setup
Power Saving :Standard
Speaker Out : On
Closed Capt ion:
Display : On
Screen Saver
Color Matrix
HD Mode :
RGB Mode : PC
set
,toselect, ,to
ENTER
,toselect, ,to
ENTER
Custom Setup
Speaker Out : On
Closed Capt ion:
Display : On
Screen Saver
Color Matrix
HD Mode :
RGB Mode : PC
Sync Mode : H/Comp
set
Power Saving
Used to view the screen while conserving power.
For details, see “Energy Saving Function” on page 29
(GB).
Speaker Out
Causes sound to be emitted from the speakers (SS-
SP10A, not supplied) when this is set to On.
Closed Caption
Displays closed captions.
For details, see “Displaying closed captions” on page 29
(GB).
Display
Select On to display the input signal information and
Picture Mode for about five seconds at the bottom of
the display panel when the power is turned on or when
switching the input signal.
Screen Saver menu
Corrects or lessens damage caused by ghosting or
burn-in that may result from the same image being
displayed on the screen for long periods of time.
Custom Setup
Screen Saver
Pic. Inversion : Off
Pic. Orbit
set
,toselect, , to
ENTER
Pic. Inversion
Sets the Screen Saver that inverts the image hue.
For details, see “Screen Saver Function” on page 41 (GB).
Pic. Orbit
Sets the Screen Saver that automatically moves the
display position of images after a predetermined
amount of time has elapsed.
For details, see “Screen Saver Function” on page 41 (GB).
Color Matrix
Sets the Color Matrix so that images are displayed in
natural color tones during input of a component signal
from an externally connected device.
For details, see “Adjusting Color Matrix” on page 43
(GB).
HD Mode
Sets the mode according to HD analog component
signals input to INPUT1, INPUT2 of the D connector
of the optional adapter.
1080i: When connected to a BS digital tuner
1035i: When connected to a Hi-Vision video deck
(base band) or other conventional Hi-Vision
device.
Notes
•Option board setup cannot be carried out in this
mode.
• The BKM-B11 D-4 connector is set to [1080i].
RGB Mode
Sets the mode when a device that outputs RGB signals
is connected to the RGB/YUV terminals of INPUT1
and INPUT2.
DTV: When connected to an RGB signal digital
tuner, etc.
PC: When connected to a PC.
Note
Option board setup cannot be carried out in this mode.