Filter
Top Products
2 Getting started
Attach the antenna cable
You can configure your system several ways, depending on what additional
components (such as a VCR, DVD player, or A/V receiver) you select. For now,
however, use the simplest configuration to check your antenna and cabling.
• Ensure that the DIRECTV
®
Receiver is not plugged into an electrical outlet.
• Attach the RG-6 coaxial antenna cable to the SATELLITE IN connector on
the back of the DIRECTV Receiver. Refer to the appropriate figure below.
R
1
TEL LINE
Model: SAT-B65
Digital Satellite Receiver
Sony Electronics, Inc.
Made in Mexico
VHF/UHF IN
VHF (SAT)
/UHF OUT
23456
7
8
9
Table 1: Rear panel connections - SAT-B65A DIRECTV Receiver
1 SATELLITE IN connector 6 VIDEO OUTPUT jack
2 VHF/UHF IN connector 7 S-VIDEO jack
3 VHF (SAT)/UHF OUT connector 8 TELEPHONE JACK
4 AUDIO OUTPUT (R) jack 9 AC POWER CORD
5 AUDIO OUTPUT (L) jack
R
21 4 5 7 9
11
15
16
8 10
12
13
14
6
TEL LINE
Model: SAT-A65
Digital Satellite Receiver
Sony Electronics, Inc.
Made in Mexico
VHF/UHF IN
VHF (SAT)
/UHF OUT
3
Table 2: Rear panel connections - SAT-A65A DIRECTV Receiver
1 SATELLITE IN connector 9 AUDIO OUTPUT (L) jack
2 RF REMOTE antenna jack 10 AUDIO OUTPUT (L) jack
3 DATA PORT 11 VIDEO OUTPUT jack
4 DIGITAL AUDIO OUTPUT optical jack 12 VIDEO OUTPUT jack
5 VHF (SAT)/UHF OUT connector 13 S-VIDEO jack
6 VHF/UHF IN connector 14 VCR CONTROL cable jack
7 AUDIO OUTPUT (R) jack 15 TELEPHONE JACK
8 AUDIO OUTPUT (R) jack 16 AC POWER CORD