Filter
Top Products
38
US
Navigating through
menus
1 Press MONITOR to switch the remote
FUNCTION to MONITOR.
2 Press INPUT repeatedly to select the
desired input (other than FM).
3 Press MENU.
MENU display appears.
4 Press M/m to select the item.
• [Inputs]: Selects equipment that is connected to
the system. You can assign a label to your
equipment or skip unused inputs conveniently.
For details, see page 45.
• [Settings]: Adjusts the [Video], [Screen],
[Parent], or [Setup] settings. For details, see
page 38.
5 Press </M/m/, to change/set the
setting, then press (OK).
To exit the menu, press MENU.
To return to the last display, press O RETURN.
Note
You cannot use the monitor menus while receiving the FM
signals.
The Inputs feature lets you select the inputs connected
to your system. You can also assign a label using
Label Video Inputs in the Setup settings (see page 45).
1 Select [Inputs] from the MENU control
panel and press (OK).
The Inputs list appears. Make your selection.
2 Press M/m to select the desired input and
press (OK).
The Settings feature lets you enter to the settings
screen where most of advanced settings and
adjustments are performed.
Overview of the Settings menus
The following options are available in each menu. For
details on navigating through menus, see page 39.
Also, see page in parentheses for details of each menu.
1 Select [Settings] from the MENU control
panel and press (OK).
[Settings] display appears.
2 Press M/m to select the options.
Using the Monitor Menu
</M/m/, (OK)
MENU
MONITOR
INPUT
O RETURN
Select from connected equipment
Select: Set: Exit:
Inputs
Settings
MENU
MENU
Using Inputs in MENU
Using Settings in MENU
Select: Set: Exit:
Inputs
Return
Video 1
Video 2
Video 3
DVD
Video 5
Video 6
Video 1
Video 2
Video 3
DVD
Video 5
Video 6
MENU
Back:
Video
Picture Mode: Vivid
Reset:
Picture: Max
Brightness: 40
Color: 60
Hue: 0
Sharpness: 18
Color Temp.: Cool
CineMotion: Off
Black Corrector: On
NR: Low
Backlight: Max
Select: Exit:
Set:
Video 1
MENU
1
2
3
4