Filter
Top Products
19
RECORDING
Assign the recording mode for each channel. Options are:
Continuous, By Motion, By Sensor, By Schedule or Disable.
SENSOR
RECORDING
Enable setting up to 4 sensors for the specified channel using the
control button (◀ ▲ ▶ ▼).
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 15
seconds to 20 minutes(Selectable)
POST EVENT
RECORD
Set the post event recording time duration for the specified channel.
(10-30 seconds)
AUDIO
Enable/disable audio recording for the specified channel.
Fixed-available on only from channel 1 to channel 4.
SCHEDULE
Set the recording schedule. Press SEL to go to schedule setup
screen.
RESOLUTION
Set the resolution to 1280X720, 640X360
3-3-1. Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the items using
the control button (◀ ▲ ▶ ▼).
Once the channel 1 is selected, SCHEDULE-CH1 screen is displayed. Select ALL or each day using the
control button (◀ ▲ ▶ ▼) and set the recording mode using the SEL button repeatedly
.
Figure 3.3.2. Schedule Recording Setup Screen
C: CONTINUOUS recording, When selected the color will change to Blue
M: MOTION recording, When selected the color will change to Yellow
S: SENSOR recording, When selected the color will change to Red
-: Does not record
[ALL]: Move the cursor to ALL and select a recording mode C,M or S using the SEL button to set the same