Filter
Top Products
69
Audio: Sets whether to perform or not audio recording.
Post Event Record: Sets the duration of the event recording.
Schedule: Sets the schedule for schedule recording.
10-5-3. Device
Select Device to set the sensor input/alarm output conditions, PTZ control and spot setting conditions.
Setting a Sensor Input Terminal: Specify a sensor input terminal number and set the type.
Setting the Motion Zone/Sensitivity: Select the zone where the motion sensor is active. It is necessary to
set a detection frame when PARTIAL ZONE is selected. Select the level of detection sensitivity of the
motion sensor. Sensitivity selections: 1~9(High sensitivity level)
Partial Zone: If selecting Partial Zone, a button is displayed to the right. Click the button and click(or drag)a
grid cell in the desired detection frame.
Setting an Alarm Output Terminal: Specify an alarm output terminal number (1-4) and set the alarm
output conditions.
Alarm Out No.: Specifies the alarm output terminal number (1-4)