Filter
Top Products
28
▼) and SEL button. Enter the current password and select OK. Enter
the new password and select OK. Enter the same password again to
confirm and select OK. Then the message “PASSWORD CHANGED”
is displayed.
The factory default password is 1111.
3-8. Setup – Network Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
NETWORK icon and press SEL button to enter the setup menu item. Navigate through the menu items
using the control button (◀ ▲ ▶ ▼) and change the value of the menu item using the control button (◀
▲ ▶ ▼). To return to setup menu screen, press the ESC button
Figure 3.8.1. NETWORK Setup Screen
Table 3.8.1. Menu Items in Network Setup Screen
Item
Description
PORT
Port number (Default: 5445)
WEB PORT
Web Sever Port number
NETWORK TYPE
Select a type of network connection. Options are:
DHCP and STATIC
Note. Other parts of the network setup screen change depending on
what network type you select.
DHCP
DVR automatically get IP varying from time to time from network and
does not therefore need to be set.