SRS Labs Plasma Display Panel Television Flat Panel Television User Manual


 
English - 10
Freezing the Current Picture
You can freeze the picture when watching a television programme simply by
pressing the STILL button. To return to normal viewing, press it again.
To prevent screen burn-in, this function will automatically cancel after
5 minutes.
Plug & Play Feature
1 If the television is in standby mode, press the POWER () button
on the remote control. The message to start Plug & Play is displayed.
2
The Language menu will automatically appear after several seconds.
3 Select the appropriate language by pressing the
or
button.
Press the ENTER/OK () button. The message to check the connected
status of the antenna is displayed.
4 Make sure that the antenna is connected to the TV.
Press the ENTER/OK () button. The Country menu is displayed.
5 Select your country or area by pressing the
or
button.
Press the ENTER/OK () button. The menu to select channels is
displayed.
6 To start channel store, press the ENTER/OK () button.
The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER/OK () button to set the clock.
7 Press the œ or button to select the hour or minute.
Set these by pressing the
or
button.
You can enter the Hour, Minute by using the numeric buttons on the
remote control.
8 Press the ENTER/OK () button to confirm your setting.
The DTV channel scan menu appears and the DTV channel is automatically
updated.
If the DTV channel is updated, the Source in the source list of the Input
menu is automatically changed to DTV.
For detailed descriptions about DTV channel update, refer to page 28 of
this manual.
If you want to reset this feature …
1 Press the MENU () button to display the menu.
2
Press the or button to select Setup, then press the
ENTER/OK ()
button.
3 Press the ENTER/OK () button again to select Plug & Play.
The message to start Plug & Play is displayed.
When the television is initially powered on, several basic customer settings proceed
automatically and subsequently.
The following settings are available.
Start Plug & Play
OK
Plug & Play
Enter Exit
Setup
Move Enter Return
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
More
TV
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 10