Filter
Top Products
English - 7
☛
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
☛
When connecting an external device, match the colour of the connection terminal to the cable.
ΠCOMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
Connecting CI (Common Interface) CARD
- When not inserting “CI CARD” in some channels,
“Scrambled Signal” is displayed on the screen.
- The pairing information containing a telephone number, CI
CARD ID, Host ID, and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please
contact your service provider.
- When the channel information configuration has finished, the
message “Updating Completed” is displayed, indicating that
the channel list is now updated.
➢
You must obtain a CI CARD from a local cable service
provider. Remove the CI CARD by carefully pulling it out
with your hands since dropping the CI CARD may cause
damage to it.
´ ANT IN VHF/UHF (75Ω)
75Ω Coaxial connector for Aerial/Cable Network.
ˇ Connecting external Audio Devices
Connect RCA audio signals from the TV to an external
source, such as Audio equipment.
¨ DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
ˆ DTV SERVICE
Connector for service only.
Ø COMPONENT IN
Video (Y/PB/PR) and audio (AUDIO L/R) inputs for Component.
∏ PC IN / AUDIO
Connect to the video and audio output jack on your PC.
” EXT 1, EXT 2
Inputs or outputs for external devices, such as VCR, DVD,
video game device or video disc players.
’ HDMI 1/DVI IN
- Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection. When using the
optional HDMI/DVI adapter, the DVI analog audio inputs on
your TV allow you to receive left and right audio from your
DVI device. (Not compatible with PC)
- When connecting this product via HDMI or DVI to a Set Top
Box, DVD Player or Games Console etc, make sure that it
has been set to a compatible video output mode as shown
in the table below. Failure to observe this may result in
picture distortion, image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to a PC
or Laptop Graphics Card. (This will result in a blank screen
being displayed)
DVI AUDIO IN L/R
DVI audio outputs for external devices.
HDMI IN 2
Connect to the HDMI jack of a device with HDMI output.
˝ SERVICE
Connector for service only.
Ô POWER IN
Connect the supplied power cord.
➢
Supported modes for HDMI/DVI and Component
Input/Output Specification
Connector
Input
Video
EXT 1
Only TV or DTV output is available.
Output you can choose.
✔
✔
✔
✔
✔
EXT 2
Video + Audio (L/R)RGBAudio (L/R)
Output
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
O
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O