SRS Labs Plasma Display Panel Television Flat Panel Television User Manual


 
English - 14
Channel names will be assigned automatically when channel information is
broadcast. These names can be changed, allowing you to assign new names.
1 Press the MENU () button to display the menu.
2
Press the or button to select Channel, then press the ENTER/OK ()
button.
3
Press the or button to select Name, then press the
ENTER/OK ()
button.
4
Press the or button to select
the channel to be assigned to a new name,
then press the
ENTER/OK ()
button.
5
Press the or button to select a letter (A~Z), a number (0~9), or a symbol.
Move on to the previous or next letter by pressing the
œ or
button
, then
press the
ENTER/OK ()
button.
6 Repeat steps 4 to 5 for each channel to be assigned to a new name.
7 Press the EXIT button to exit.
Assigning Names to Channels
Name
Move Adjust Return
Prog. Ch. Name
0C
-- -----
1C 4
-----
2C 74
-----
3C 75
-----
4S 1
-----
TV
A
Not available in DTV or external input mode.
This operation allows you to change the programme numbers of stored channels.
This operation may be necessary after using auto store.
1 Press the MENU () button to display the menu.
2
Press the or button to select Channel, then press the ENTER/OK ()
button.
3
Press the or button to select Sort, then press the
ENTER/OK ()
button.
4 Select the channel that you wish to move by pressing the
or
button, then
press the ENTER/OK () button.
5 Select the number of the programme to which the channel is to be moved by
pressing the
or
button.
Press the ENTER/OK () button. The channel is moved to its new position
and all other channels are shifted accordingly.
6 Repeat steps 4 to 5 until you have moved all the channels to the required
programme numbers.
7 Press the EXIT button to exit.
Sorting the Stored Channels
Sort
Move Enter Return
Prog. Ch. Name
0C
--
1C 4
2C 74
3C 75
4S 1
TV
Not available in DTV or external input mode.
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 14