Filter
Top Products
Code Menu
25
1. Press or to select
debug.
2. Press
.
3. Point the target device's
remote control’s infrared eye
at the SRC-3810/3815
learning eye located at the
bottom of the unit (see
Figure 1: Front View, Page3)
and keep apart between
2~4 inches (5~10cm).
4. Select a device (for example
TV).
The SRC-3810/3815 Touch Screen sequentially displays
screens corresponding to first the hard keys, then page
one of the soft keys, and finally page two of the soft keys.
The blinking rectangle denotes the key being learned.
5. Press the corresponding
button of the target device's
remote control.
The SRC-3810/3815 screen
displays an OK message if
the code was successfully
collected.
Press
to toggle between
hard key and soft key
displays.
6. Press
or to exit debug
mode.