Filter
Top Products
Using the Transmission Feature
35
After you have set up the QUICK CH, press any QUICK CH
(e.g., “NEWS”)
to open the QUICK CH screen. Using the
CH+ and CH- to scroll through all channels stored in this
QUICK CH .
Press that QUICK CH
(e.g., “NEWS”)
again to exit the QUICK
CH screen.
Using the Transmission Feature
The SRC-3810/3815 can transmit data to a PC with the
optional USB-UART cable. You can download firmware
upgrades from the Internet or transfer configuration
data.
Enter the setup menus, scroll to TRANS and press
to
enter the transmission menu.
Before you use this feature to transfer data with
your PC, you must connect the optional USB-UART
cable. Refer to Appendix B for more information.
1. Press or to select TRANS.