Filter
Top Products
12 Starter Guide SurfControl Web Filter for ISA v5.5
I
NSTALLATION
D
ECISIONS
ISA Server Authentication
2
ISA SERVER AUTHENTICATION
You can use ISA Server to authenticate your users, if you don’t want to use NetBIOS or EUM. This
procedure is different, depending on whether you are using ISA Server 2000 or 2004 and above.
ISA Server 2000
To configure ISA Server 2000 for User Authentication, perform the steps outlined in the following
instructions:
1 Open the ISA Management Console from the Start > Programs menu.
Find your machine name within the ISA tree. This will be listed within Internet Security and
Acceleration Server\Servers and Arrays.
2 Right-click on your machine name and choose Properties from the pop-up menu.
3 Select the Outgoing Web Requests tab.
4 Select the Ask unauthenticated users for identification check-box.
5 In the same dialog double-click your machine name in the Server column of the identification pane.
This can be found in the Identification Section. The Add/Edit Listeners dialog is displayed.
6 Select the Integrated authentication check box.
7 Select the Basic with this domain check-box and click Yes on the ISA Server Configuration pop-
up.
8 Click the Select Domain dialog. Alternatively, use the Browse button to navigate to your domain.
9 Click OK and close all of the open dialogs until you return to the Properties dialog for your ISA Server.
10 Click OK on this dialog and select the Save Changes and restart the service(s) radio button on the
ISA Server Warning pop-up. Click OK again.
ISA Server 2004/2006
To configure ISA Server 2004 or 2006 for User Authentication, perform the steps outlined in the following
instructions:
1 Open the ISA Management Console from the Start > Programs > Microsoft ISA Server menu.
Find your machine name within the ISA tree. This will be listed within Internet Security and
Acceleration Server 2004.
2 Expand the Configuration option.
3Select Networks.
4 Select the network you want to monitor and select Edit Selected Network from the Tasks pane.
5 From the Network Properties dialog box, select the Web Proxy tab.
6 Click Authentication.
7 From the Authentication dialog box, select Require all users to authenticate.
8 Click OK to close the Authentication dialog box.
9 Click OK to close the network Properties dialog box.