Filter
Top Products
OPERATION
PANIC (EMERGENCY RECORDING)
Motion event Recording
Schedule Recording
When an emergency situation occurs, by pressing the PANIC button on the
remote controller or REC button on the front panel, you can record pre -
recorded image and the video on all cameras regardless of recording schedule
manually.
How to record monitoring channels
REMOTE CONTROLLER
FRONT PANEL
Press the PANIC button
Press the REC button
All channels are recorded automatically when you use DVR at first time. If you
want to change the recording schedule, you can change it in the SETUP
menu(1.BASIC SETTING - RECORDING SCHEDULE).
There are four ways for recording; Schedule recording, PANIC recording, Motion
Event recording and Alarm Input recording. (6. TECHNICAL SETTING -
ALARM INPUT)
You can select that the recording channel, day, time, image quality, REC mode
and number of frame for recording. For more detail, See SETUP manual
(1.BASIC SETTING - RECORDING SCHEDULE).
Set recording mode to MOTION on SETUP menu (1.BASIC SETTING -
RECORDING SCHEDULE).
Select MOTION AREA on SETUP menu (1.BASIC SETTING -
CAMERA REGISTRATION).
Recording will be started when the motion occurs at set area.
For more detail, See SETUP manual (1.BASIC SETTING - CAMERA
REGISTRATION).
WARNING
It is user’s responsibility to determine whether audio recording is legal for their site.
To start or stop panic recording manually:
NOTICE
This image will be displayed on video channel when DVR cannot receive
video signal.
NOTICE
On time laps recording mode, icon displayed on channel.
On all event(motion, alarm input) recording mode, icon displayed on channel.
On panic recording mode, icon displayed on each channel and icon is
flicker on screen. Panic recording can not be controlled with a mouse.