Filter
Top Products
SETUP
z SENSOR INPUT
Select sensor action way between
NC(NORMAL CLOSE) or NO(NORMAL OPEN).
z ALARM
Select alarm action way between High >> Low
or Low >> High.
Press
+
buttons on remote controller to select ETC. in SETUP menu.
ETC.
z BAUD RATE
z DATA BIT
z STOP BIT
z PARITY
Select the BAUD RATE. (Default is 9600.)
1200 → 2400 → 4800 → 9600 → 19200 →
38400 → 57600 → 115200
Baud rate means the speed of between the
devices.
Select 5~8 the DATA BIT. (Default is 8.)
Data bit means the number of data bit.
Select 1 or 2 the STOP BIT. (Default is 1.)
Stop bit means the number of stop bit
between data transfer.
Select the PARITY. (Default is No Parity.)
No Parity → Odd Parity → Even Parity.
Parity means the error check bit while the
data is transferring.
Press ID and current DVR ID number and then ENTER button on the
remote controller.
How to use DVR ID
Current DVR ID
Press the number ~ button same as current DVR ID
1
DVR ID (1)