Filter
Top Products
If you click FORMAT, warning window will be displayed. Once the HDD is formatted, all recorded
data, system logs and event logs will be lost.
Press
+
buttons on remote controller to select HDD in SETUP menu.
Shows the used disk space on the HDD.
If you choose Yes, DVR overwrites
previous recording when HDD is full. If
you choose No, the recording is stopped
when the HDD is full for recording.
If free space remains less than 2 Giga
byte, the disk space bar on OSD will be
changed green to red color.
If you format the hard drive, it will erase all
the recorded data and log on the HDD.
Shows the HDD’s model name and used &
total disk space.
If “On” is set, it will beep when the HDD
becomes full.
z HDD WARNING
OSD
z FORMAT
z
HDD INFORMATION
z DISK SPACE
z OVERWRITING
z BEEP
Displays a warning message when the
DVR runs out of free space on the HDD
for recording.
Message will be flickered on the live
screen when low disk space (less than
1.5G, about 2 second).
Recording stop message will be
flickered on the live screen when HDD
remains less under 1G.
HDD (Hard Disk Drive)
CAUTION
Press
+
buttons on remote controller to select PRE-POST RECORDING in SETUP menu.
z PRE RECORDING
Pre recording time means the amount of
time recorded and saved before panic,
alarm and motion events occurred. Video
will be recorded from the buffer for the
set period of fixed time (4~8 Sec).
z
POST RECORDING
Post recording time is the amount of time
recorded after motion and alarm events
are finished. Video will be continuously
recorded for the set period of time after
event is finished.
Post recording time are 5, 10, 30 Sec, 1, 5,
10 Min.
PRE-POST RECORDING
SETUP