Filter
Top Products
Connections and Set-up
6
EN
TV functions of the remote control
Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with your set can
be used to navigate through the menus and to configure all the general settings.
Navigating through menus
Press the MENU button to display the main menu. Select a menu option using the buttons, then press the button to access the
submenu.
Return to a previous menu using the MENU or RETURN button or select and press .
¥
Standby.
TV To access TV mode.Press this button to control the television.
Quit standby.
VCR To access VCR mode.
DVD To access DVD mode.
SAT To access SAT mode.
AUX To access AUX mode.
AMP To access AMP mode.
light To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is being programmed,
- if the batteries are run down, it flashes when you press a button.
PIP To enable the different display modes.
SWAP To swap the main picture with the PIP picture.
To access the Mixed display function in Teletext mode.
To display current time.
FREEZE To freeze the screen.
To access the Stop function in Teletext mode.
ZOOM To change format/zoom.
To access the Zoom function in Teletext mode.
LIGHT Remote control light.
M/S (red button) To select a sound type.
LIST (green button) List of programmes.
INFO (yellow button) Status information.
GUIDE (blue button) Inactive.
TEXT (purple button) Teletext.
The coloured buttons can also be used for operating Teletext.
To select menu options.
To set functions, change values in menus.
OK To access menus during initial set-up.
MENU To access the main menu.To go back one level in menus.
EXIT To exit the menu structure,Teletext mode and PIP mode.
+/- To control the volume.
To switch the sound off and back on again.
RETURN To return to the previous channel/AV programme.
To go back one level in menus.
To access the Hidden answers function in Teletext mode.
PR+/- To change channels.
0-9 To select a channel by its number.For two-digit channel numbers,press 0 to
display “--”,then enter the channel number.
To enter numeric values.
AV
.
PC To select an appliance connected to an AV or PC socket.
Using the remote control for other equipment
The remote control supplied with your television can be used to control other appliances using the programmable buttons VCR, DVD,
SAT, AMP and AUX.For each button you can control the following appliances:
VCR:video recorder
DVD:DVD player
SAT: satellite receiver, cable network
AMP: hi-fi system, Home Cinema amplifier
AUX:decoder for terrestrial digital TV set and any other appliance.For instance, if you have two video recorders, you can program the
VCR button to control one video recorder, and program the AUX button to control the other one.
Note:The TV button is not programmable.
42PB120S5-EN2 22/03/05 15:37 Page 6